Atlanta Radon Map
EPA Zones & County Radon Data
Most Metro Atlanta counties are in EPA Zone 1, the highest radon risk category. Testing is strongly recommended.
Understanding EPA Radon Zones
High radon potential. Predicted average indoor levels above 4 pCi/L. Testing is strongly recommended.
Moderate radon potential. Predicted average indoor levels between 2-4 pCi/L. Testing is recommended.
Low radon potential. Predicted average indoor levels below 2 pCi/L. Testing is still recommended.
Metro Atlanta County Zones
| County | EPA Zone | Risk Level | Includes |
|---|---|---|---|
| Fulton County | Zone 1 | High | Includes Atlanta, Sandy Springs, Alpharetta |
| DeKalb County | Zone 1 | High | Includes Decatur, Dunwoody, Brookhaven |
| Cobb County | Zone 1 | High | Includes Marietta, Smyrna, Kennesaw |
| Gwinnett County | Zone 1 | High | Includes Lawrenceville, Duluth, Suwanee |
| Cherokee County | Zone 1 | High | Includes Canton, Woodstock |
| Forsyth County | Zone 1 | High | Includes Cumming |
| Hall County | Zone 1 | High | Includes Gainesville |
| Clayton County | Zone 2 | Moderate | Includes Jonesboro |
Important Limitation
Radon zone maps show general regional trends but cannot predict individual home levels. Two homes on the same street can have very different radon levels. The only way to know your home's radon level is to test.
Radon Map FAQs
What do EPA radon zones mean?
EPA zones predict the average indoor radon screening potential. Zone 1 counties have the highest potential (above 4 pCi/L average), Zone 2 is moderate (2-4 pCi/L), and Zone 3 is low (below 2 pCi/L). These are predictions, individual home levels vary.
Why is most of Metro Atlanta in Zone 1?
Metro Atlanta sits on the Piedmont geological province, characterized by granite and other crystalline rocks that contain uranium. As uranium decays, it produces radon gas that can enter homes.
If my county is Zone 1, does my home have high radon?
Not necessarily. Zone classifications represent county averages, but individual homes vary widely. Some Zone 1 homes test below 2 pCi/L while others test above 10 pCi/L. Testing is the only way to know.
Are radon maps accurate predictors?
Radon maps provide general guidance about regional risk, but they cannot predict individual home levels. Factors like foundation type, construction, and local soil conditions significantly affect radon entry. Every home should be tested.
Where can I find EPA radon zone maps?
The EPA provides radon zone maps on their website at epa.gov/radon. State-level maps are available from Georgia Department of Public Health and other state agencies.
Does being in Zone 2 or 3 mean I don't need to test?
No. The EPA recommends all homes be tested regardless of zone classification. Even in lower-risk zones, individual homes can have elevated radon levels.
Test Your Home
Don't rely on maps alone. Contact us to discuss testing your home.
Related Topics
High Radon Areas
Learn more about specific high-risk areas in Metro Atlanta.
Radon Levels
Understand what different radon measurements mean.
Granite Geology
Why Atlanta's geology creates conditions for radon.
Radon Testing
Maps show regional risk, but testing reveals your home's actual levels.
Mitigation Systems
Solutions for homes in high-risk zones.
Radon Safety Resources
Expert insights and guides to keep you informed
Where to Place a Radon Detector: Room-by-Room Placement Guide
Exactly where to place a radon test kit or detector in your home. Room-by-room guidance for accurate results, including height, distance, and conditions.
Read more about Where to Place a Radon Detector: Room-by-Room Placement Guide →
Georgia Radon Map: County-by-County Risk Levels and What They Mean
Explore Georgia
Read more about Georgia Radon Map: County-by-County Risk Levels and What They Mean →
Installing Radon Mitigation Before Selling: Is It Worth the Investment?
Should sellers install radon mitigation before listing? The ROI, buyer psychology, and strategic benefits of proactive radon mitigation before selling your home.
Read more about Installing Radon Mitigation Before Selling: Is It Worth the Investment? →